Replacing Relates, Pipes, and Rim Parts

<< Click to Display Table of Contents >>

Navigation:  Work-Flows >

Replacing Relates, Pipes, and Rim Parts

Previous pageReturn to chapter overviewNext page

Workflow

How To

This work-flow describes the process of replacing Relates, Pipes, and Rim Parts in multiple structures.

 

To prepare for replacing these items, we will click the Replace button on the Quote screen.

 

Video Arrow

Video Tutorials

PREPARATION

Do this ...

MoreInfo 16x16

Open the Replacer screen

Go to the Quote > Replacer screen
Click the Relates, Pipes, or Rim tab at left to open the controls for the item(s) you are replacing.

Replacer

REPLACING RELATES

Do this ...

MoreInfo 16x16

Click the Relates button on the left of the screen to open the controls for Relates.

1.Select the relate that's currently in use, shown in the In Use table.
2.Select the replacement relate from the lists at the top of the panel (starting with the list on the left).
3.Select the structure(s) to be changed in the Structures panel.
4.Click the Replace button.
5.Click the Stack-All Now button to restack the changed structures.

Relates

REPLACING PIPES

AND CONNECTORS

Do this ...

MoreInfo 16x16

Click the Pipes button on the left of the screen to open the controls for pipes and connectors.

1.Select the pipe-and-connector combination that's currently in use, shown in the In Use table.
2.Select the replacement pipe-and-connector from the lists at the top of the panel (starting with the list on the left).
3.Select the structure(s) to be changed in the Structures panel.
4.Click the Replace button.
5.Click the Stack-All Now button to restack the changed structures.

Pipes

REPLACING RIM PARTS

Do this ...

MoreInfo 16x16

Click the Rim button on the left of the screen to open the controls for rim parts.

 

 

 

 

Note: If you are replacing both Rim 1 and Rim 2, always replace Rim 2 first.

 

1.Click the radio button to choose which position, Rim 1 or Rim 2, is to be changed.
2.Set the checkboxes to determine whether the replacement parts should match the size up and/or the height of the original part.
3.Select the rim part that's currently in use, shown in the In-Use table.
4.Select the replacement rim part in the list at the top.
5.Select the structure(s) to be changed in the Structures panel.
6.Click the Replace button.
7.Click the Stack-All Now button to restack the changed structures.

Rim Parts

 

RESPONDING TO ALERTS

Do this ...

MoreInfo 16x16

When alerts occur. . .

Alerts can appear for a variety of reasons. They are indicated by a salmon-colored background where action may be necessary.

 

For technical information about how to resolve those, click the link at right.

 

Replacer